|
Consommables >Ion sources nanoES
Ion sources nano ES
Maximize the power of your MS - minimize the spray
Proxeon's world-leading ion source kits offer the simplest, fastest and most flexible route for ion generation. Easily installed, they enable you to take full advantage of the powerful offline nano-electrospray technique, invented by Wilm and Mann, or use other low-flow ES approaches such as coupling with nanoscale LC or CE separation techniques.
In nano-electrospray MS, optimal performance generally requires flow rates from 10 nL/min to 300 nL/min. Proxeon ion sources, with special manipulation and visualization features, are optimally designed to handle the small emitters required to obtain such low flow rates.
Superior design flexibility
- Connect to a wide range of online couplings for stainless steel and fused silica emitters
- Switch to offline borosilicate emitters in seconds
- Apply the spray voltage via a liquid junction, through conducting ferrules or via a clip attached to the emitter
- Accurately determine the vertical and horizontal motion and position of the emitter
Straightforward installation and ease-of-use
- Each Nano ES ion source kit contains everything needed to get started immediately
- Sturdy, precise X-Y-Z manipulator accommodates several fittings
- Sliding rails allow quick retraction of the emitter
- Compact monitor system with integrated light source visualizes the emitter and inlet orifice while resolving the motion of the emitter in the horizontal and vertical components
- Easy access to knobs, source heads, and other necessary controls
 Brochure Ion sources
Désignation |
Ref |
Prix en EUR |
Ion source kit Micromass Q-TOF series, 220V/110V
Includes: Nano ES ion source housing with XYZ manipulator & fittings, Direct Junction (ES236), including a 1/32" zero dead-volume union (SC600), 2 CCD cameras, with magnifying optics, integrated light source with 1 replacement lamp (ES292), 2 monitors (ES215), AC/DC adapter for cameras & light source, interlock cable, high voltage cable, BNC cables & cable ties, 4 nanobore Stainless Steel Emitters (ES542), StageTips (SP201), Nano ES ion source installation & operation manual
1 kit
|
ES041 |
13086.00 € |
Ion source kit Sciex Q-TRAP 4000 (and API 4000), 220V/110V
Includes: Nano ES ion source housing with XYZ manipulator & fittings, Direct Junction (ES236), including a 1/32" zero dead-volume union (SC600), 2 CCD cameras with magnifying optics, 2 monitors (ES215), 2 camera mounts, integrated light source with 1 replacement lamp (ES292), AC/DC adapter for cameras & light source, BNC cables & cable ties, 4 Nanobore Stainless Steel Emitters (ES542), StageTips (SP201), Nano ES installation & operation manual.
1 kit
|
ES050 |
12571.00 € |
Ion source kit Sciex Q-STAR, 220V/110V
Includes: Nano ES ion source housing with XYZ manipulator & fittings, Direct Junction (ES236), including a 1/32" zero dead-volume union (SC600), 2 CCD cameras with magnifying optics, 2 camera mounts, 2 monitors (ES215), integrated light source with 1 replacement lamp (ES292), high voltage mains cable, replacement curtain plate for Nano ES mode, AC/DC adapter for cameras & light source, BNC cables & cable ties, 4 nanobore Stainless Steel Emitters (ES542), Nano ES installation & operation manual.
1 kit
|
ES051 |
10514.00 € |
Ion source kit Bruker Esquire/Agilent Ion Trap, 220V/110V
Includes: Nano ES ion source housing with XYZ manipulator & fittings, Direct Junction (ES236), including a 1/32" zero dead-volume union (SC600), ground cable, Teflon high voltage shield, camera and light source device, 2 CCD cameras with magnifying optics,integrated light source with 1 replacement lamp (ES292), 2 monitors (ES215), AC/DC adapter for cameras & light source, BNC cables & cable ties, 4 nanobore Stainless Steel Emitters (ES542), StageTips (SP201), adapter flange for XP, Nano ES installation & operation manual
1 kit
|
ES060 |
11943.00 € |
Ion source kit Thermo LTQ (+FT/OrbiTrap), TSQ Quantum,(Access/Discovery max/Ultra), LCQ Deca XP max, 220V/110V
Includes: Nano ES ion source housing with XYZ manipulator & fittings, Direct Junction (ES236), including a 1/32" zero dead-volume union (SC600), 2 CCD cameras with magnifying optics, 2 camera mounts, 2 monitors (ES215), integrated light source with 1 replacement lamp (ES292), high voltage main cable, AC/DC adapter for cameras & light source, BNC cables & cable ties, 4 nanobore Stainless Steel Emitters (ES542), StageTips (SP201), Nano ES ion source installation & operation manual
1 kit
|
ES070 |
12571.00 € |
Accessoires
Désignation |
Ref |
Prix en EUR |
Monitor System
Industrial quality monitor for one camera connection. High contrast image. Robust cabinet. European picture format; 110 and 220 V/50 and 60Hz. For use with ES210.
1 pc.
|
ES215 |
606.00 € |
DirectJunction
Universal sprayer and column mounting system for Proxeon Ion Sources (ES041-ES070), providing an easy to use, sturdy and reliable connection between transfer tubing, columns and emitters. Includes a zero dead-volume connector (SC600) for connection between emitter and columns.
1 kit
|
ES236 |
992.00 € |
Liquid Junction cross 1/32"
For use online with DirectJunction (ES236). Connects LC transfer line and column. Modified MicroCross Union, integrated platinum electrode with 2mm connector. Includes 10 microtight tubing sleeves fitting for OD 375μm capillaries.
1 pc.
|
ES237 |
517.00 € |
Liquid Junction Tee 1/32"
For use online with DirectJunction (ES236). Connects LC transfer line and column. Modified MicroTee Union, integrated platinum electrode with 2mm connector. Includes 10 microtight tubing sleeves fitting for OD 375μm capillaries.
1 pc.
|
ES238 |
469.00 € |
Nano ES ion source head, offline.
For use offline with 1.2 mm OD borosilicate emitters (ES380-ES388). Includes: conducting and soft ferrules, safety cover to shield from spray potential, special purpose nut for fastening and pressurizing a plastic test tube if sample liquid is to be forced into a short silica emitter and sprayed directly from the tube. Compatible with ion source kits ES041 to ES070.
|
ES240 |
594.00 € |
Liquid Junction cross (1/40") with mounting bracket.
For use online. Connects LC transfer line and emitter. Modified MicroCross Union, integrated platinum electrode with 2mm connector. Includes 10 microtight tubing sleeves fitting for OD 375μm capillaries, 1 micro ferrule plug to close waste channel option, 1 adapter for mounting onto source. Compatible with ion source kits ES041 to ES070.
1 pc.
|
ES241 |
606.00 € |
Static air pressure device.
Provides static backing pressure to Nano ES ion source head (ES240). Modified 10ml gas-tight syringe with quick connect luer adapter. Holding rack keeps syringe on pressure.
1 pc.
|
ES242 |
560.00 € |
Holder for packed emitters.
For mounting of packed emitters from 50 mm to 200 mm in length. Compatible with ion source kits ES041 to ES070. Connect to LC transfer line via a liquid Junction (ES245). Use with a variety of liners/sleeves and ferrules. Includes set of 10 sleeves for O.D. 0.375 mm.
1 pc.
|
ES244 |
857.00 € |
Liquid junction Tee (1/40") for ES244.
Includes: MicroTee with platinum liquid junction, 10 sleeves for capillaries of OD 0.375 mm, and adaptor for Column holder (ES244)
|
ES245 |
503.00 € |
High voltage connector for ES240
Replacement electrode for Nano ES Source head, offline (ES240).
2 pcs.
|
ES247 |
57.00 € |
Lamps for Nano ES light sources.
Compatible with ion source kits ES ES041 to ES070.
2 pcs
|
ES292 |
91.00 € |
Replacement ferrules and O-ring kit.
Fittings for Nano ES ion source head, offline (ES240). Includes six conductive ferrules, three back-end O-rings, 1/16 polymer ferrule for air pressure connection.
|
ES294 |
103.00 € |
Conductive ferrules.
For use with Nano ES ion source head, offline (ES240)
10 pcs.
|
ES296 |
80.00 € |
High Pressure Column Packer and Sample Loader
For fast, convenient packing of nanobore LC columns and loading samples onto LC columns. Pack or load columns or ES emitters down to 50 mm in length, maximum length unlimited. Includes three-way valve for fast pressurization and depressurization, inserts for holding 0.5 mL and 1.5 mL test tubes as well as glass vials. Standard fittings for capillaries of O.D. ~375 μm. Other ferrules can be used (e.g. from Chromatography Research Supplies, Inc. USA)
1 pc.
|
SP035 |
1777.00 € |
High Pressure Column Packer and Sample Loader with Integrated Stirrer
For fast, convenient packing of nanobore LC columns and loading samples onto LC columns. Integrated magnetic stirrer keeps column packing material in a uniform suspension. Pack or load columns or ES emitters down to 50 mm in length, maximum length unlimited. Includes three-way valve for fast pressurization and depressurization, inserts for holding 0.5 mL and 1.5 mL test tubes as well as glass vials. Standard fittings for capillaries of O.D. ~375 μm. Other ferrules can be used (e.g. from Chromatography Research Supplies, Inc. USA).
1 pc.
|
SP036 |
2697.00 € |
Lid for Column and Sample Loader SP035 & SP036.
Lid includes top Swagelok nut, 5 Vespel ferrules and sealing O-Ring.
1 pc.
|
SP040 |
354.00 € |
retour à la page Proxeon
voir emetteurs nanoES |
